Cole Harris
It is now rainy season ahead and you surely don’t want to see leakage in your home this time. So check the roof first for the cracks and broken tiles. It would be better if you call the local roofing contractors for inspection. They have the eyes to detect the fault in the roof and also proper tools to mend any problem they find in the roof. A good roofer in this city can work on any type of roof whether it is shingles, flat metal or some other type. He will work for you at affordable rates, regardless you call him to mend some residential roof or commercial roof.
If there is only some small problem like one or two tiles are broken or if you find some crack or holes then you can do the repair yourself. You just need to follow these steps.
For cracks and holes
To fill up cracks you first need to scrub the area with the help of a wire brush. After that you need to make the paste of white roofing cement. Now, just fill the crack with the cement paste to seal it. This will mend the crack and prevent the leakage from happening.
For broken tiles
To replace a broken tile, you need to remove the tile above it overall. Then you need to further break the broken tile into pieces and remove the pieces. Also pull out the nails if there are any. After that you just need to spread the roofing cement in the required area and sprinkle some water over it or use some adhesive. Place the tile over it and press it gently to level it with the surface. If there are more than two or three tiles broken then it is better to call the professionals for it as if you go doing this on your own then it will consume your lot of time.
